Product Video
Product Overview
This vibration test bench can set experimental conditions such as acceleration, velocity, and vibration frequency, simulating vibration environments and vibration load evaluations.
● Energy-saving power system "ECO-Vibe neo":
ECO-Vibe neo is designed and developed based on the concept of an environmentally friendly vibration test device. The test conditions vary depending on the test specimen. Generally, the test thrust is calculated by the product of the mass of the test specimen, fixture, and test bench, and the test acceleration. However, when this test thrust is less than the device's maximum thrust, compared to the power used by the moving coil part, the excitation power supply that continuously outputs current to generate the DC magnetic field accounts for a higher proportion of power consumption. ECO-Vibe neo achieves power saving by allowing the user to select the thrust. Moreover, since no initial investment is required, cost savings can be effectively realized from the first year of use.
● Energy-saving power system vibration test device:
By eliminating the excitation coil and excitation power supply, "state-of-the-art energy saving" is achieved on a medium-sized vibration test device with a thrust of 10kN. Additionally, the cooling blower is reduced by 70%, and the rotation speed is controlled based on the temperature of the vibration generator, greatly achieving energy saving and noise reduction.
Product Features
Product Specifications
● F Series Vibration Test Stand [Standard Specifications]: Maximum excitation force 1300～60000 N
Commonly used general electric vibration test stands in electronic equipment and automotive-related parts.
The F series equipment operates on the principle of generating thrust by cutting magnetic lines of force with electric current, mainly composed of a "vibration generator" that produces vibration and a "power amplifier" that supplies electricity. It uses a D-class digital control system, allowing free setting of test requirements such as excitation force, velocity, displacement, and acceleration. The equipment interface is simple and fast, and the application of a high-power voltage amplifier makes the equipment highly efficient, low in heat generation, energy-saving, and environmentally friendly.
● FH Series Vibration Test Stand [High-Speed Specifications]: Maximum velocity 2.0～2.3 m/s
Especially when greater acceleration is needed at frequencies close to 20～80Hz, a vibration test device capable of producing higher speeds is required. The FH series vibration test device is a high-speed specification vibration test device manufactured for vibration testing under these conditions.
● FL Series Vibration Test Stand [Large Displacement Specifications]: Maximum displacement 100 mm p-p
A vibration test device with a maximum displacement expanded to 100 mm p-p, mainly used to handle vibration conditions with frequencies below 10Hz and large displacements.
● FV Series Vibration Test Stand [Ultra-High-Speed Specifications]: Impact pulse duration 11 ms, acceleration 980 m/s² (100G)
A vibration test device used for testing under conditions of "impact pulse duration of 11 ms and acceleration of 980 m/s² (100G)."
● FT Series Vibration Test Stand [Transport Test Specifications]: Vibration test stand for packaging and transportation
A vibration test device specially designed for "safe transportation." It can be equipped with mechanisms to strengthen eccentric load moments and increase maximum load weight for stacked cargo and large goods. Additionally, to facilitate easy securing of packaged goods with straps, it is equipped with honeycomb-structured clamps and a platform with hooks around the perimeter. Moreover, the horizontal vibration table uses an oil film structure, reducing maintenance burdens.
● FC Series Vibration Test Stand [Large Water-Cooled Specifications]: Large excitation force 60 k～200 kN
A large vibration test device, ideal for vibration testing requiring larger specimens and greater thrust. This test device uses water cooling, which has higher cooling efficiency compared to air cooling, resulting in thrust higher than any other series. It can handle vibration tests for large electronic equipment, automotive parts, aerospace components, avionics, satellites, aerospace systems, and defense systems. This series meets various military and international standards including MIL, NDS, ASTM, IEC, ISO, BS, and JIS.
● FP Series Vibration Test Stand [Permanent Magnet Type Specifications]: Ultra energy-saving vibration test stand without excitation coils
● Advanced energy-saving vibration generator without excitation coils and excitation power supply
● The first in the industry to adopt a permanent magnet type vibration generator for vibration test devices with thrust over 10 kN.
By eliminating excitation coils and excitation power supply, it achieves "the highest level of energy saving" among conventional medium-sized vibration test devices. At the same time, the cooling fan size is reduced to 70% of the original and can adjust speed according to the vibration generator's temperature, significantly saving electricity and achieving quiet operation.
● FM Series Vibration Test Stand [Electric Three-Axis Specifications]: Maximum vibration frequency 2000 Hz, simultaneous three-axis vibration test stand
● A three-axis vibration system integrating years of technological achievements from EMIC Corporation and the National Metrology Institute.
● This vibration test device is suitable for the green energy-saving drive system "ECO-Vibe neo," environmentally friendly. It allows selection of the thrust range used, reducing required power.
● After adding a test chamber for combined temperature and humidity tests, it can become a composite environmental test device.
● FB Series Vibration Test Stand [Servo Three-Axis Specifications]: Multi-axis vibration test stand for transport testing and seismic evaluation
● Specialized vibration test device for transport vibration testing.
● Reproduces actual vibrations through simultaneous three-axis vibration.
● By switching among three axes, it can sequentially perform two-axis vibration in vertical and horizontal directions. No need to switch the vibration generator axis or reset the specimen, thereby shortening the overall test time.
Product Advantages
Application Areas
Recommended Products
FAQ
Online Message
If you are interested in our products, please leave your email to get a free quotation, thank you!
OUTLETS
Service Outlets
Shanghai-Head Office
Shanghai Hapoin Enterprise Development Co., Ltd.
Address: Building 6, Southern Metropolis Garden, No. 1165, Jindu Road, Minhang District, Shanghai
Telephone:+86 150 2686 5822
Email:info@hapoin.com
Shenzhen Branch
Shenzhen Hapoin Ruihe Technology Development Co., Ltd.
Address: Room 302, 3rd Floor, Building B, Kaicheng High-tech Park, Dalang Street, Longhua District, Shenzhen
Telephone:+86 755 2223 2285
Email:sales@hapoin.com
Hong Kong Branch
HAPOIN ENTERPISE LIMITED
Address: Unit 917A, 9/F., Tower A, New Mandarin Plaza, No. 14 Science Museum Road
Telephone:+00852 61187991
Email:sales@hapoin.com
Vietnam Branch
HAPOIN VIETNAM
Address: 6th Floor, CTM Office Building, No. 139, Zhipiao Road, Zhipiao District, Hanoi, Vietnam
Telephone:+84 398 848 969
Email:sales@hapoin.com
Japan Branch
HAPOIN CO., LTD.
Address: 6th Floor, 2-3-8 Iwamotocho, Chiyoda-ku, Tokyo
Telephone:+81 070 9356 1267
Email:sales@hapoin.com
Kunshan Office
Kunshan Office
Address: 10th Floor, Building B, Modern Plaza, No. 8, Weiye Road, Yushan Town, Kunshan City
Telephone:+86 150 2686 5822
Email:sales@hapoin.com
Taipei Branch
Uniwin Chemical Co.,LTD.
Address: No. 14, Alley 3, Lane 250, Section 2, Huanhe South Road, Taipei 10853
Telephone:+886 02 2336 2202
Email:sales@hapoin.com
Beijing Office
Beijing Office
Address: Room 306, Building 4, Zhongtou Oriental, West Zhihe North, Chaoyang District, Beijing
Telephone:+86 150 2686 5822
Email:sales@hapoin.com
Complaint & Suggestion
+86 13901841523
advice@hapoin.com
Contact Number
Headquarter Address
6, South Metropolis Garden, No. 1165, Jindu Road, Minhang District, Shanghai
Follow the official account
Follow the video account
